Niya - Air Stimulator N6

This is a dual-independent motor product. The motors for the VIBRATION and AIR can be controlled to provide either single or dual motor stimulation whilst in use. - To turn N6 on press and hold buttons (C) or (D) until the product vibrates, this shows the product is activated. Once activated you can cycle up through the settings by pressing (C) or (D). - Turn on/ off the VIBRATION motor by pressing the top button (C) for 3 seconds. Single-click button (C) to change the VIBRATION setting. - Turn on/ off the AIR motor by pressing the bottom button (D) for 3 seconds. Single-click button (D) to change the AIR setting. - The N6 is fully turned off by holding down either button (C) or (D) for 3 seconds. Recharging Instructions: - Attach the magnetic USB head to the toy instructed below, and plug it into the USB power source. - The light will be constant while the product is charging. - When fully charged the light will flash - The toy will complete its charge in around 1.5 hours. - For optimal performance fully charge the product before your first use. - Remove the magnetic head from the toy and disconnect it from the power source once charging is completed. Charging your N6 - Before you first use it, please charge the product fully. - Once charged the LED light will flash continuously, the product can now be unplugged and used. Vibrator Care Instructions: Take care when using the vibrator for the first time, the vibration can be intense 1. Clean your vibrator after every use. 2. Take care when cleaning your vibrator remember it is an electrical item, moisture can damage the product and also react with the batteries. 3. Keep your vibrator clean and dry, store it in a dry place, as moisture can damage batteries and motor. 4. Always store your vibrators separately, different materials have different chemical configurations and may react with each other 5. Always allow your vibrator to cool down before storing it in a safe place, vibrators are electrical and motors get warm with use. 6. Excessive usage of the vibrator will wear out the motor and may cause the motor to overheat. If you feel your vibrator is getting unduly hot, switch it off and allow it to cool down, before continuing to use it.