#Niya - Couples Massager N2

Using your N2 - To turn the N2 on press and hold button (C) - To change settings press button (C). - The N2 is fully turned off by holding down button (C) for 3 seconds/ Recharging Instructions: - Attach the magnetic USB head to the toy instructed below, and plug in to USB power source. - The light will be constant while the product is charging. - When fully charged the light will flash - The toy will complete its charge in around 2 hours. - For optimal performance fully charge the product before your first use. - Remove magnetic head from toy and disconnect from power osurce once charging is completed. Charging your N2 - (A) Before you first use, plase charge the product fully. - (B) Once Charged the LED light will flash continously, the button can now be unplugged and used. Vibrator Care Instructions: Take care when using the vibrator for the first time, vibration can be intense 1. Clean your vibrator after every use. 2. Take care when cleaning your vibrator remember it is an electrical item, moisture can damage the product and also react with the batteries. 3. Keep your vibrator clean and dry, store in a dry place, moisture can damage batteries and motor. 4. Always store your vibrators seperately, different materials have different chemical configurations and may react with eachother 5. Always allow your vibrator to cooldown before storing in a safe place, vibrators are electrical and motors get warm with use. 6. Excessive usage of the vibrator will wear out the motor and may cause the motor to over heat. If you feel your vibrator is getting unduly hot, switch off and allow it to cool down, before continuing to use.