Niya - Couples Massager N5

Using your N5: - To activate the N5 and remote press button (C) or (D) for 3 seconds. When the remote is paired with the N5 the LED light will flash. - Once both units are paired you can control the N5 and cycle up through the 10 settings using the remote pressing button (C) to operate the top motor, or button (D) to operate the bottom motor. - The (C) button on the N5 also controls both motors through the settings at the same time. - To turn the N5 and the remote off, press and hold for 3 seconds. Recharging Instructions: - Attach the magnetic USB head to the toy instructed below, and plug it into the USB power source. - The light will be constant while the product is charging. - When fully charged the light will flash - The toy will complete its charge in around 1.5 hours. - For optimal performance fully charge the product before your first use. - Remove the magnetic head from the toy and disconnect from the power source once charging is completed. Charging your N5: - Before you first use it, please charge the product fully. - Once charged the LED light will flash continuously, the product can now be unplugged and used. Vibrator Care Instructions: Take care when using the vibrator for the first time, the vibration can be intense 1. Clean your vibrator after every use. 2. Take care when cleaning your vibrator remember it is an electrical item, moisture can damage the product and also react with the batteries. 3. Keep your vibrator clean and dry, store it in a dry place, as moisture can damage batteries and motor. 4. Always store your vibrators separately, different materials have different chemical configurations and may react with each other 5. Always allow your vibrator to cool down before storing it in a safe place, vibrators are electrical and motors get warm with use. 6. Excessive usage of the vibrator will wear out the motor and may cause the motor to overheat. If you feel your vibrator is getting unduly hot, switch it off and allow it to cool down, before continuing to use it.